XtendLan

XL-RAID-SATA-USB is a RAID system designed specifically for the user. It is your most cost effective choice; you  can expand storage at your discretion while ensuring the safety and integrity of stored data.

Plug & Play Removable Tray Module Design
The design of swappable tray allows instan  access to device after each swap, so hard-disk could be removed or installed at any time  which means easy maintenance.

Independent operation system design
It can be identified as a separate hard-disk, there is no need to install driver, instant access when device is turn on.

No required driver
No need to install additional driver yet is compatible and operational when using Windows/Mac/Linux operating system i.e. Windows 2000/XP/Server2003/Vista/Mac 10 and above/Linux Core 2.4 and above.

Supports hot swap function
There is not necessary need to turn off the system power when changing failed hard-disk online.

Simple and easy operation with the use of LCD control panel
Using buttons on the right of LCD, it is able to set up RAID mode and shedule backup. The status of cooling fans and temperature is also displayed on LCD for easy management

Auto rebuilding data online
After change of hard-disk, system automatically performs reconstruction of data, no need to set up any command.

Automatically schedules backups to prevent potential virus attack.
User is able to program, within tolerable range, by press of button to set up preferred days of automatic schedule backup, periodic backup system data to prevent system failure from virus attack.

GUI Monitoring Software
It  offers  Window-based RAIDGuide GUI software, get  connected to the  system through RS232 port for monitoring  RAID system status at client’s end. In case of failures, you could be notified with e-mail to ensure total protection.

Compatibility with SATA /USB 2.0 transfer interface
Supporting a variety of transfer interface while increasing transfer rate up to 56MB/sec (USB 2.0) ~150 MB/sec (SATA), effectively improve system efficiency.

Specifications

• Host interface: USB 2.0 + SATA
• Host transfer rate:  USB 2.0(56MB/Sec)/ SATA (150MB/Sec) RAID Level    RAID 0 / RAID 1
• Hard-Disk interface: 3.5” Hard-Disk SATA 1.5 GHz
• Support large capacity hard-disk: RAID 0 supports up to 1000GB and above, RAID 1 supports up to 500 GB and above
• Swappable hard-disk tray design: Supports hot swap capable hard-disk tray at 2 sets
• Automatic data reconstruction: Yes
• Monitoring software: RAIDGuide GUI software
• System detector: Failure sensors for hard-disk,
• Temperature failure and cooling fan detectors Controller display: LCD screen with blue backlight/control panel Warning notification: Buzzer
• Cooling fans module: 3 cm cooling fan at 1 set ;
• 4 cm cooling fan at 1 set;
• Operation system requirement: Windows 2000/XP/Server 2003/Vista/MAC 10 or above Linux Core 2.4 or above
• Operating temperature: 0℃ to 40℃
• Power supply: 75 watts, Input voltage: 90-240V
• Safety certification: CE/FCC
• Exterior material: Aluminum case
• Dimension: 122W x 205D x105H
• Weight (kg): 2 kg

Ejected disk:



Rear panel (USB 2.0 and eSATA connection):



Installed HDD into withdrawable unit:


Installed HDD into withdrawable unit (connector side):