XtendLan

The VDSL (Very High Data Rate DSL) networking solution delivers cost-effective, high-performance broadband access to multiunit buildings (hotels, apartment, and multi-tenant unit office buildings) and enterprise campus environments such as manufacturing, educational campuses, and medical facilities. VDSL technology dramatically extends Ethernet over existing Category 1/2/3 wiring at speeds 10Mbps (full duplex) and distances up to 1200 meters. The VDSL technology delivers broadband service on the same lines as Plain Old Telephone Service (POTS), digital telephone, and ISDN system. In addition, VDSL supports modes compatible with asymmetric digital subscriber line (ADSL), allowing service providers to provision VDSL to buildings where broadband services already exist.

The VDSL solution includes VDSL Concentrator (VDSL switches), VDSL CO(Point to Point), and VDSL Modem for Customer Premise Equipment (CPE) device.

The VDSL solution delivers everything needed to quickly deploy an Ethernet-based network with the performance required to deliver high-speed Internet access at much greater distances and drive services like IP telephony and audio/video streaming. With this technology, a broad range of customers can benefit from lower operating costs and rapid deployment. This solution provides a RS-232C console port for monitoring VDSL status and to configure speed.

This device is a CPE side solution, and bridge between external Internet backbone through a router for IP sharing and the building 110D telephone rack or telephone box. It utilizes the available telephone wire to enable high-speed Internet access to building residents.

VDSL Modem uses the phone line networking technology endorsed by the VDSL, and utilizes the already existing telephone wire to deliver 4/1, 5/10/15 Mbps Internet access on each RJ-11 port. This gives users a low-cost, end-to-end solution and eliminates the need to train installation teams on multiple systems.

VCQ102SB is an Ethernet to VDSL CPE side adapter that enables high speed internet access to building residents, campuses students and hotel guests by connecting Ethernet equipped computers, set-top box or any internet access device to the existing telephone wires.

The VDSL Modem uses the phoneline networking technology endorsed by the VDSL, an association of industry-leading companies for in– networking focus on the existing telephone wire. The Modem utilizes the already existing telephone wire to deliver 10Mbps internet access with no interference on the existing telephone service. It allows user to make calls while access the internet on the same wire simultaneously. It even allows staying connected 24 hours on internet connections, thus, eliminating dial up prior to internet access.

The Modem is simple to install and use. One RJ-45 Ethernet connects to a Router, Ethernet Switch or to LAN card. The RJ11 ports available to connect to any existing modular phone jack. There are two RJ-11 jacks on the Modem to provide phone extensions. No software installation makes the Modem highly compatible with different operating system ( Windows, Linux, Apple….etc).

Features

• 4-band VDSL unit
• Compliant with IEEE 802.3 & 802.3u Ethernet Standards
• Compliant with ETSI, ITU, ANSI VDSL standards
• Provides 1 x 10/100M auto-sensing RJ-45 Ethernet ports
• Supports Bandwidth setup with 4/1,5/10/15 Mbps VDSL RJ-11 ports
• POTS / ISDN Splitter port RJ-11 x 1 (Splitter on board)
• Ethernet transport with POTS / ISDN traffic over single copper wire pair
• Spectral compatibility with XDSL, ISDN(2B1Q/4B3T).
• Robust operation on severely distorted line
• Provides Ready LED.
• Provides LED indication Link/Active Status for Ethernet port.
• Provides LED indication Link for VDSL port.

Specifications

• Compliant with IEEE 802.3 & 802.3u Ethernet Standards
• Compliant with ETSI, ITU, ANSI VDSL standards
• 10/100M auto-sensing RJ-45 Ethernet ports x 1
• 4/1, 5/10/15 Mbps VDSL RJ-11 port x 1
• POTS / ISDN Splitter port RJ-11 x 1
• Surge Protection
• Switch method : store and forward
• Flow control Full duplex : IEEE 802.3x Half duplex : Backpressure
• Driver capable : 4/1Mbps: 1.9km;  5Mbps :1.5km; 10Mbps : 1.2km (Default); 15Mbps : 1km;
• Indication LED x 3: Ready LED x1, Ethernet Link/Active LED x 1, VDSL Link LED x 1
• VDSL Frequency Spectrum : Transmitter: 0.9 ~ 3MHz; Receiver: 4.5 ~ 7.9 MHz; Splitter: 0 ~ 620k
• Power consumption : 2.5 Watt
• Weight : 345 g
• Dimensions: 95 x 110 x 24 mm
• External switching power adapter Input: AC 100-240 volts/50-60Hz Output: DC 5V/1A or above
• Operating Temperature : 0 °C ~ 50 °C (41F ~ 122F)
• Storage Temperature : - 20 °C ~ 65 °C (-4F ~ 149F)
• Humidity : 10%~90% non-condensing
• Certifications : FCC, CE Mark class A, EN60950