XtendLan

The XtendLan VDSL2 CPE Modem (VCF104S) is the next advance in point-to-point VDSL2 applications, providing extraordinary bandwidth of up to 100 Mbps symmetrical (200 Mbps aggregate bandwidth) at distances exceeding 1,100 feet (350m) and a maximum distance of over 4,900 feet (1,500m) at asymmetrical speeds exceeding 1.5Mbps Upstream and 21Mbps Downstream over one twisted-pair of network grade cable. Telephone grade twisted-pair cable can be used, however, speed and distance will vary based the actual cable used, quality of line, and the environment. The VCF104SE features four auto-sensing RJ-45 Ethernet Ports, full-featured Router functionality, and management via Web Browser (HTTP).

The XtendLan VDSL2 CPE Modem provides a cost effective solution for all of your networking needs. The extraordinarily high-speed connection provided by the VCF104S is ideal for delivering video, data, and voice services, including HDTV, VOD, video-conferencing, high-speed internet access, and advanced voice services including VoIP, as well as connecting to other network devices and satellite buildings. The VCF104S utilizes pre-existing phone lines or any other network-grade twisted pair cable and only require one (1) twisted pair (2 wires) to operate. The VCF104S is the ideal accompaniment to a fiber to the premises (FTTP) rollout, where fiber is used to provide the main line access and copper cable is split off to provide access to the satellites, or the VCF104S can be used to eliminate all-together the expense and hassle of fiber cable and equipment, leased line, and other data line services, saving you time and money.

The VCF104S VDSL2 CPE Modem comes ready for instant plug and play operation right out of the box for distances up to 4,900 feet (1,500m). The VCF104S features auto-sensing/auto-configurating link operation, so there's no configuration required other than setting the networking address parameters (if required for your network). The VCF104S also features the ability to combine telephone (POTS/ISDN/PBX) service over the same 2 wires and features built-in POTS/ISDN splitters to eliminate external splitter devices.

The VCF104S is simple to install and use. The VCF104S VDSL2 CPE Modem is placed at the remote location and the Line Port is connected to network cable or phone line connection, the VDSL Port/s are connected to the VDSL Port/s of the remote network device/s (NIC, router, switch, Access Port, etc.), and the Phone Port is connected to the telephone set or fax machine (if applicable). Next, the VCF104S is connected to the AC power source and the link is established automatically on power up and is automatically configured for the maximum speed based on length and quality of the network cable or phone line. No line rate configuration required!

The XtendLan VCF104S VDSL2 CPE Modem represents the latest and highest performance VDSL2 over copper technology at a price you can afford. With the VCF104S, you can finally maximize the use of existing network grade or telephone lines at symmetrical speeds up to 100Mbps (200Mbps aggregate bandwidth) and distances up to 4,900 feet (1,500m).

Line Port Features

• Provides high-speed, full-duplex, auto-sensing/auto-configuring link (no configuration required); 100Mbps symmetrical (200Mbps aggregate bandwidth) at distances exceeding 1,100 feet (335m); Maximum distances over 4,900 feet (1,500m) at asymmetrical speeds exceeding 21Mbps downstream and 1.5Mbps Upstream
• Only one twisted-pair of network grade or telephone grade copper required
• Operating Frequency: 138KHz - 30MHz
• RJ-11 connector with built-in surge protection
• Signal to Noise Ratio (SNR) Line Quality Monitoring
• Compliant with ETSI, ITU, ANSI VDSL2 Standards

Phone Port Features

• Supports POTS/ISDN/PBX
• RJ-11 connector with integrated POTS/ISDN splitter
• Band pass filter spectrum: 0Hz to 120KHz

Uplink Port Features

• 4 X 10/100 Mbps auto-sensing RJ-45 ports
• Supports Auto MDIX
• Supports flow control (IEEE 802.3x) for full-duplex operation
• Supports back pressure for half-duplex operation
• Compliant with IEEE 802.3 & 802.3u Ethernet Standards

Other Features

• Console Port: 1 X DB9 RS-232C/115.2Kbps
• LEDs: 1 X Power (PWR) LED, 1 X Link/WAN LED, 4 X Uplink Port LEDs (Link/Activity)
• Switching: Switching Method: Store-and-Forward; MAC Address Table: 1K Addresses
• Router Support: PPPOE, uPnP, NAT/DHCP/DMZ, Firewall, Router & Switch Mode, Web Management (HTTP), Telnet, TFTP
• Dimensions: L x W x H = 7.2" x 5.74" x 1.57" (184mm x 146Mm x 40mm)
• Weight: 0.907 Kg
• Power:  External Switching Power Adapter,  Input: 100VAC - 240VAC, 50-60Hz Output: 12VDC/1A
• Power Consumption: 7.5w
• Operating Temperature: -13 to 149°F (-25 to 65°C)
• Humidity: 10% to 90% Non-Condensing
• Agency Compliance: CE, FCC, VCCI