VCQ802

Catalogue number: VCQ802

VCQ802

VDSL concentrator, 8x VDSL 25Mbps, 2x 100Mbps, Web / SNMP, 4-band

VDSL concentrator, 8x port VDSL, 2x Gigabit 1000Base-T, built-in splitter POTS/ADSL, 16x RJ-45. Support VLAN 802.1Q, 802.1x, QoS, shaping, Spanning Tree. For 4-band VDSL units.



 
The VCQ802 is a VDSL IP DSLAM that aggregates 8 lines of 4-band Very-High-Data-Rate Digital Subscriber
Line (VDSL) into Giga Ethernet uplinks for high-speed data/Internet services.
Based on QAM-based 4-band VDSL technologies, VCQ802 extends data service with line rate of solution for .
services such as remote lecturing, telemedicine, video conferencing, Video-on-Demand (VoD), IP-TV etc. Internet
access, and other various high-speed data applications.
When the number of subscribers increases, the second uplink fast Ethernet interface can be used to daisy chain to
another VCQ802. Alternatively, multiple VCQ802 can be connected to another LAN switch to form a two-tier
configuration, thus supporting a lot more subscribers. The VCQ802 is an ideal solution for delivering cost-
effective, high-performance broadband/multimedia services to Multi-Tenant Units (MTUs) or Multi-Dwelling Units
(MDUs) such as hotels, campus, hospitals and telecom.


Features

  • Compliant with IEEE 802.3 & 802.3u & 802.3ab Ethernet Standards
  • Compliant with ETSI, ITU, ANSI standards
  • Supports 5M/15M/25Mbps per port symmetrical bandwidth over phone
  • wiring with long driver capable1.7/1.1/0.6Km(5577/3609/1968 feet).
  • Provides 2 x 10/100/1000Mbps Ethernet RJ-45 Ports with Auto MDI/MDIX
  • Supports quality of phone wiring detected with SNR(Signal to Noise Ratio) indications
  • Supports GARP/GVRP IEEE-802.1p/q VLAN with 256 groups static Vid or 4094 groups dynamic Vid
  • Flow control method by IEEE802.3x for Full Duplex & Back Pressure for Half Duplex
  • Compliant with IEEE 802.1v protocol-base VLAN classification
  • Compliant with IEEE 802.1p COS by class of service with 2-level priority queuing
  • Compliant with LACP IEEE 802.3ad Trunking (Link aggregation)
  • Supports Auto-speed
  • Supports Multicast IP table/IGMP v2 with 512 groups
  • Supports IEEE 802.1d Spanning trees for MAC bridge with redundant link
  • Supports port Mirroring (Sniffer)
  • Support Broadcast Storm filtering
  • Ethernet transport with POTS / ISDN traffic over single copper wire pair
  • Spectral compatibility with XDSL, ISDN(2B1Q/4B3T),HomePNA.
  • Supports port security with MAC address filtering.
  • Supports Web Base and Telnet for remote management
  • Supports system POST LED
  • Supports SNMP v1 RFC-1493 Bridge MIBs:RFC-1643 Ethernet MIB, RFC-1213 MIB II,
  • Enterprise MIB(Fan and Temperature management)
  • Supports RMON groups 1(Statistics), 2(Alarm), 3(Event), 9(History)
  • Cascading up to 8 Units along with Giga switch
  • Supports TFTP/XMODEM for firmware upgrade
  • Supports In-Band/Out-of-Band Management
  • Supports Fan & Temperature Monitor & management
  • Surge protected for VDSL ports
  • Splitter on board
  • 10/100/1000Mbps Ethernet ports:2 x RJ-45 with auto crossover
  • POTS/ISDN splitter port: 8 x RJ-45
  • VDSL port: 8 x RJ-45
  • MAC address table:8K Entries
  • Switching method:Store-and-forward
  • RS-232 console port:DB-9Pin Female / 9600bps
  • Port security by MAC address filtering
  • LED indication:Power good and POST LED, Link/Active/Speed Status for Ethernet port, Link for VDSL port
  • VDSL Frequency Spectrum:Transmitter: 0.9MHz ~ 3.9MHz, Receiver: 4MHz ~ 7.9MHz
  • POTS/ISDN pass filter spectrum:0 ~ 630 KHz
  • Internal switching power adapter Input: AC 85-265 volts/50-60Hz/1A
  • Dimensions: 435 x 255 x 44 mm
  • Operating Temperature : 0°C ~ 50°C(41F ~ 122F)
  • Storage Temperature : - 20°C ~ 65°C(-4F ~ 149F)
  • Humidity: 10%~90% non-condensing
  • Safety: FCC, CE Mark
  • RoHS compliant